RACHAEL


Made with perimeter profiles 60 mm x 60 mm, and 60 mm x 160 mm, and 60 mm x 120 mm for sliding and swing gates, minimum thickness 5 mm.The infill is made with

aluminum profiles of different dimensions 150x50x2 100x50x2 50x50x230x50x2, these profiles will be blocked at the gate by means of a concealed aluminum connection.All the covering and fixing profiles will be painted separately and reassembled laterpainting, all this in order to give a product painted in all its parts.The cladding profiles can be inserted either externally, or internally, with some limitations forproblems of encumbrance in some solutions. Stainless steel flangesHinges concealed inside the profile with brass pins brass bushings and greaser, the hinges are adjustable and supplied with a covering plate.The gates will be supplied with our standard degreasing and powder coating

  • - ISEO ELECTRIC BLOCK. 
  • - STOP STOP. 
  • - UNI-EN CERTIFICATIONS WITH SERIAL NUMBER
  • .- 10 YEAR WARRANTY WITH REAL MUTUAL INSURANCE. 
  • - INSTALLATION, USE AND MAINTENANCE MANUAL



Custom built in Tig welded aluminum


Adelinda two-leaf aluminum gate Standard sizes achievable:

Measurement in millimeters Width

  1. 3000 Code: 80600B / 1
  2. 3500 Code: 80600B / 2
  3. 4000 Code: 80600B / 3
  4. 4500 Code: 80600B / 4
  5. 5000 Code: 80600B / 5
  6. 5500 Code: 80600B / 6
  7. 6000 Code: 80600B / 7

Adelinda aluminum gate SLIDING SYSTEM Standard achievable measures:

Measurement in millimeters Width

3000 Code: 80600B / 1

3500 Code: 80600B / 2

4000 Code: 80600B / 3

4500 Code: 80600B / 4

5000 Code: 80600B / 5


Aluminum gate Adelinda PEDESTRIAN Standard sizes achievable:

Measurement in millimeters Width

1000 Code: 80600P


OUR GATES ARE CERTIFIED IN THE FOLLOWING TEST : 

* Resistance to wind load
* mechanical force
* safe opening
* maneuvering forces
* no rejection of dangerous substances

MAINTENANCE PROGRAM :

​Each Alutrend door is secured by R.C. Political Reale Mutua Assicurazioni products for 10 years.

The police, valid throughout Europe, guarantees your purchase for a period of ten years, protected from unforeseen circumstances 

MAINTENANCE PROGRAM :

-Urban - rural control and cleaning every 12 months.
-Industrial inspection and cleaning every 6 months.
-Marine inspection and cleaning every 3 months.
-Industrial and marine inspection and cleaning every 3 months.


Our standard painting process is covered by: 

  • Sandblasting, degreasing and aging washing, Drying, polyester powder application qualicoat, firing, cooling. Our particularity is to try to paint the parts of the manufactured article disassembled, so as to guarantee a greater coverage of the surfaces in sight, and a better quality of the treatments.
  • For areas with a higher risk of oxidation, such as coastal areas or near industries, upon request there is an additional treatment, before powder coating, you can do an epoxy primer coat, to significantly increase the seal, after the hand the painting and powder are applied in the background.
  • We recommend our standard colors, peeled or riuvidi to avoid some imperfections due to manual processing of the product. For any opaque ral colors the perfect uniformity of the surface is not guaranteed
  • Annual semi-annual maintenance based on the installation areas: cleaning of painted surfaces with neutral soaps to eliminate eventual atmospheric deposits of chemical treatment industries, saltiness. Lubrication of moving parts...
  • Shipping includes packing and transport. The material travels insured, for any damage must be immediately communicated, to initiate the compensation procedures. Compensation practices must follow the times and methods of insurance. The cost of transport must be reconfirmed when ordering or shipping because the costs are very variable depending on the periods and the workload of the transporter. 
  • unloading is excluded during transport, because the availability of lifting equipment is not guaranteed. For heavy loads the customer must be equipped with lifting means for unloading packages that can not be moved manually. It is advisable to make arrangements with the carrier when you will be contacted by the courier. 
  •  the place of unloading must have characteristics suitable for the delivery truck. Please provide delivery locations with adequate space and stops.  we recommend our standard colors, peeled or riuvidi to avoid some imperfections due to manual processing of the product. For any opaque ral colors the perfect uniformity of the surface is not guaranteed

SALE AND SHIPPING THROUGHOUT EUROPE


Via del Puglia
Loc. Bivio Pomonte
06035 Gualdo Cattaneo (Perugia) Italy